Product ID:PAINTERS SEMI GLOSS WHITE & COLORS, 306
MSDS Date:01/01/1987
FSC:8010
NIIN:00F005709
MSDS Number: BBTBQ

UNITED PAINT & COATINGS/GREENACRES, WA 99016

Emergency Phone: (800) 541-4383

Cage: FO132

UNITED PAINT MFG CO

GREENACRES, WA 99016-5000 US

Telephone: 509-926-7143/800-835-9673

Cage: 64246

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 4%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Effects of Overexposure:INHALATION: DIZZINESS, CENTRAL NERVOUS SYSTEM
DEPRESSION, NARCOSIS. EYES/SKIN MAY CAUSE IRRITATION

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/FRESH WATER
FOR 15 MINUTES. SKIN: WASH W/SOAP & WATER. IF IRRITATION PERSISTS,
CALL A PHYSICIAN. INGESTION: INDUCE VOMITING. CALL PHYSICIAN. DON'T
INDUCE VOMITING OR GIVE ANYTHING IF UNCONSCIOUS.

Extinguishing Media:USE WATER FOG, ALCOHOL FOAM, DRY CHEMICAL OR CO2.
Fire Fighting Procedures:DON'T ENTER CONFINED SPACE, FULL BUNDER GEAR,
INCLUDING SCBA
Unusual Fire/Explosion Hazard:WATER TO COOL CONTAINERS. _

Spill Release Procedures:DIKE AND ABSORB WITH ABSORBENT MATERIAL, SUCH
AS CLAY, SAND OR OTHER SUITABLE MATERI.

Handling and Storage Precautions:KEEP FROM FREEZING. DON'T TAKE
INTERNALLY. USE ONLY IN A WELL VENTILATED AREA. KEEP OUT OF REA OF
CHILDREN.

Respiratory Protection:USE ATMOSPHERE-SUPPLYING OR AIR-PURIFYING RESP
FOR ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST AND GENERAL VENTILATION RECOMMENDED.
Protective Gloves:PLASTIC/RUBBER
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
MSDS DATE: 7/7/86. PH: 8.6 + .20

Boiling Pt:B.P. Text:212F
Vapor Pres:233
Vapor Density:>1
Spec Gravity:1.26
Evaporation Rate & Reference:(BU AC = 1) <1
Solubility in Water:APPRECIABLE
Appearance and Odor:VISCOUS LIQUID; PAINT LIKE ODOR.
Percent Volatiles by Volume:36%

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CO & UNIDENTIFIED COMPOUNDS MAY FORM
DURING COMBUSTION.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
LOCAL, STATE AND FEDERAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.